As the world has rapidly progressed through these years, we have come to see that the hammers have been rightfully replaced with nail guns.
Working with a nail gun is actually so much better than working with a hammer; it’s not only easy but also super convenient as you get to choose what kind of nail gun do you want for any project.
Nail guns come in so many different sizes, designs, bodies, and weights; choosing a nail gun as per your convenience is workload gives you an upper hand.
Today, we will be doing a step-by-step guide on how to nail baseboards with a nail gun.
A baseboard is placed in between the space of the wall and the floor in order to protect the wall and keep it from getting damaged.
In order to install a baseboard, you will need a nail gun to do it properly, so let’s learn how we can do it!
Things you need
Here is a list of things that you need to gather before you start installing your baseboard with the help of your nail gun.
- Safety glasses and gloves
- Nail gun
- Measuring tape
- Wood filler
- Coping saw
Step by Step Guide
Step 1: Pick the right kind of Nail Gun
Firstly, what you’ll have to do is to choose the right kind of nail gun from a large variety of nail guns that starts from framing nail gun, finish nail gun, brad nail gun, gas-powered nail gun, etc.
See Also: Top Nail Gun For Baseboards Reviews 2022
Now what you have to understand is that installing a baseboard is a small project and can be easily done with a finish nail gun that is built to drive 15-16 nails.
A finish nail gun is also versatile and powerful enough to help keep the piece of baseboard steady.
Step 2: Measure the baseboard
Now the next step is pretty basic and easy; all you have to do is get your measuring tape and make sure you get the length of your wall very accurately.
You will find out that the wall is either larger than your baseboard or smaller than it.
If the baseboard is smaller than your wall, then you can add another baseboard along with the first one and join them together.
If your baseboard is larger than your wall, then you can easily cut it to the length of the wall with the help of a coping saw!
Step 3: Cut the baseboard
Yes, this step is just as easy as it sounds! Cutting the baseboard, you have to cut corners.
Now, if the corers are angled 90 degrees, cut them into 45 degrees with the help of a coping saw so that they can meet outside.
Step 4: Steady the baseboard
If you were thinking that cutting the baseboard was the easiest of the steps, well, you have got it all wrong.
Steadying the baseboard is the easiest job of all!
All you have to do in order to steady the baseboard, you have to add some glue to the back of the baseboard and stick it to the wall so that it does not move while you are nailing the baseboard.
Step 5: Prepare your gun
Now, here is the most important task in the step-by-step guide.
Preparing the nailing gun!
What you have to do is that you have to charge your nail gun, load the magazine, plug your nail gun into an air compressor, give it some pre-shoots to make sure there are no jams.
If it works finely, then you can move on to the next step!
Step 6: Nailing process
Last but definitely not the last step, put your nail gun on the surface of the baseboard, make sure it is in the right position and direction and then pull the trigger.
Firstly what you have to do is nail all the corners of the baseboard to make sure it is properly fixed.
Then you can move on and shoot more nails where you want to after every 20 inches.
Using a nail gun to nail your baseboard is very easy; you have to learn a few tricks and tips to master it, and then you can do it all by yourself in just new minutes!