How To Inflate A Pool With An Air Compressor

Almost everyone wishes that they had a pool in their house, where they could relieve the worries and pangs of the whole day in just a single dive.

Most of us want to be underwater out of our curious nature from childhood.

Unfortunately, having a pool in your house is not a piece of cake as it comes quite costly and requires a ton of maintenance.

It would help if you were rich enough for that extra piece of land, which is not the case for most of us.

However, alternatives are also there. Consider an inflatable pool. It is a smart and easy solution.

You need to pay them for the package, and after that, it’ll be just you and the deep water!

Inflatable Pool

The cost and maintenance of such pools are affordable by a medium level citizen of any country. They can be as large as your lawn and as high as the height of your neck.

However, one thing which could be challenging to deal with is to inflate such a humongous pool. With small inflatable pools, you need an air pump, some effort, and boom; it’s done in half an hour or so.

But you cannot use a pump for a large-sized pool as you’ll spend the whole day trying to fill the thing. In this condition, a different solution is required, which requires less effort.

Air Compressor

An air compressor is an invention of the modern era. The compressor is used to increase the pressure of the air and throw it in the required direction.

It can be used to control the flow of air. This device is used in many mechanical devices worldwide.

Be it your car engine, your air conditioner, or whatsoever; a compressor is a vital part of them. It is also used to fill the tires of all types of vehicles with air.

How To Use An Air Compressor?

When using an air compressor, you need to keep some safety measures by following a set of precautions.

Apart from the mechanical air compressors, there are electrical models that require even more careful while using.

Air Quality

Firstly, you need to ensure that the air you’re using is of good quality, with as few impurities as possible.

Any contamination will affect the performance of the compressor and deteriorate the filter.

To remove the moisture content of the gas from the mixture, you could utilize an air dryer compound and expose it to the air inside the compressor.

Workspace

To use an air compressor for this purpose, you need a set amount of area or land to work in.

Adequate workspace will help you achieve the best result in the least amount of time.

You can create a layout after consulting with a professional for the newly installed compressor.

It should be simple to move around, and of course, there should be an electrical connection for electric compressors.

Safety

Prevention is better than cure, and you should always be active and vigilant in the case of any incoming and possible problem.

If your compressor is electrical, then you’re not supposed to expose it to water.

It can mess up with the electrical components of the device, and repairing costs will also be high.

Other than that, you run the risk of being electrolyzed.

When changing oil or refueling, always turn off the power button as you could burn your skin.

Connect the compressor to the plugs which are equipped with lightning arrestors. In the end, always keep a fire extinguisher with you to overcome any mishap.

How To Use An Air Compressor For Your Pool

You have managed an air compressor and all the safety measures required.

Now comes the real part that is how are you going to use this compressor to fill your enormous pool efficiently.

Types of Air Compressors

There are several models available that can serve your purpose in this regard. Consider electric air compressors. They are a smart choice for home uses.

They can be easily bought online. However, if the pool is bigger, you might need a bigger tank for the compressor.

It is a powerful device and can do the job in a tad bit.

However, it would help if you were careful not to overfill as there is a risk of blowing up the pool.

Location

It would help if you chose the right place for the job.

Check for any pointy surface objects which could compromise the air filled inside the pool, and instead of taking a good swim, you’ll have to manage the drain as well.

Steer the place clear of any such objects, observe the surroundings carefully.

It is a big pool, and you won’t have a chance to undo something once filling starts as it will be done in very little time.

Steps To Inflate The Pool

First things first, you need to set up your pool and make sure your air compressor is properly installed.

If the air compressor is heavy-duty, it’ll require some time for building up enough compressed air.

Now you need to remove the cap from the air filler valve to connect it with the compressor pipe nozzle for initiating the process.

Make sure that the connection with the compressor is flawless. Check if the nozzle is sitting in well enough. Check if the flap is properly disengaged.

Start filling the air. Now keep a generous check if the process is being carried out rightly. It would help if you had an idea of a filled pool.

It should not be as hard as a rock. By doing that, you are making it too tight, and it will burst more easily.

Your pool must be filled to the point that there is tolerance left. You should be able to press it down a bit.

When enough air is filled, disconnect the nozzle and immediately close the valve. Close the compressor, and enjoy it!

Conclusion

I think I have equipped you with the basic level of knowledge, and being a sensible person, you can now DIY with ease.

Always keep the safety measures in mind and follow the instructions. After all, we all need some rest and entertainment in life!

Written By
More from Michael Cox
10 Best Cordless Nail Gun for Fencing 2022 | NailerGuide
A cordless nail gun is a good tool to have, but the best...
Read More
Leave a comment

Your email address will not be published.