Best 23 Gauge Pin Nailers 2022 | Reviews & Guide

Best-23-Gauge-Pin-NailersAre you annoyed when you do small molding or trimming tasks, but the wood scatters all around the place?

Well, worry no more as pin nailers are specifically designed to take care of such tasks. However, the real problem is faced when you decide to buy the nailer.

There are so many options that one can quickly get confused.

In this review, we will take a look at the best 23 Gauge Pin Nailers out there so it can become much easier for you to choose the best one amongst them, as per your requirements.

Let’s start without any further ado!

Buyer’s Guide

If you want to pick the best pin nailer out there, there are some points that you need to be aware of. Always make sure you put stress on these factors when choosing a specific machine.

Power Source

You can either get a pneumatic nailer or a battery-operated one. The choice should be based upon your nature of work.

If you have an air compressor or plan to buy one and need the nailer for heavy-duty, you should opt for the pneumatic one as it can deliver more power than the cordless one.

On the other hand, if you wish to have a very portable nailer that you can take anywhere, and you can compromise a bit on power, a cordless one would be a better choice for you.


The size of the nailer is quite important while using it, and you again know the projects you would be doing with it to choose the size.

The bigger ones are considerably heavier, making them hard to use but are better for flat surfaces.

However, if you wish to use the nailer in confined places and want maneuverability, always go for a smaller-sized one.

Moreover, it will be easier to work with for a long time as it will be lightweight.


This refers to the number of nails the magazine can hold. The bigger the number is, the lesser the times you will need to refill it since it will get empty less sooner.

Choosing a very small magazine size will only result in stopping and refilling it often. So, choose something mediocre, probably up to 100 nails.

Depth Adjustment

Different nails need to be done on different depth levels. This makes the setting of depth adjustment very crucial for a nailer.

So, whatever device you choose, make sure it offers you ample options for depth adjustment, and those options are also easy to apply.

Fastener Length

Just like we talked about the depth adjustment level, there are sometimes pins of different lengths. They usually range from 3/8” to 2”.

So, the more the number of sizes a nailer can accept, the better. You would have a more versatile machine that can be used with different nails.

However, you can skip this if you know you don’t need to work with many different lengths of nails.

Top 23 Gauge Pin Nailers Reviews

After going through some of the most famous and highly rated products from different sites, here I will present to you the final 12 picks, which qualified for the best 23 Gauge Pin Nailer.

Each one is listed with its respective pros and cons to make your choice further easier.

1. Hitachi NP35A 23 Gauge Pin Nailer

If you are into tools, you must have heard the name Hitachi. There isn’t anybody better when it comes to making top-quality tools, which is an excellent example of it.

With a very wide variety of nails to support, it automatically adjusts the magazine according to the size of the nails you load into it, pretty great, right?

Moreover, it has a reload indicator, making it quite convenient to show when you need to refill it. Lastly, the rear exhaust is another great thing, and it takes away all the debris from your workplace.

More photo & price on


  • Great rear exhaust
  • Automatic length adjustment
  • Large mag capacity
  • Reload indicator


  • No tool-less release on the nose
  • Customer support is average

2. Bostitch HP118K Pin Nailer

Bostitch is another great manufacturer that never fails to deliver fantastic quality within affordable price tags, and it’s no surprise to see its products topping the review charts.

This pin nailer comes with an amazingly low-profile nose piece, which helps provide a clear site and is relatively lightweight.

The aluminum body is quite easy to work with and doesn’t get you tired out even after long hours. The body is overall quite durable, and the performance is also no less than the best!

More photo & price on


  • Very durable body
  • Lightweight
  • Low profile nose piece tapers.
  • Comes with many accessories


  • Doesn’t perform great with 1” pins
  • Not for heavy work

3. Freeman PP123 23-Gauge Pin Nailer

Freeman PP123 pin nailer is one of a kind, and the price it comes at and the quality it delivers, combined with all the features it carries, makes it a pretty unrealistic machine.

It has everything you can expect from a top-class pin nailer, yet it’s so light on your pocket.

The pneumatic nailer is quite easy to use and has an ergonomic shape while coming with great safety features and a safety trigger.

The pin size selector is also great and lets you work with various projects.

More photo & price on


  • Versatile in usage
  • Great value for money
  • Many safety features
  • Durable


  • Lacks premium build quality

4. NuMAx SP123 Pneumatic Pin Nailer

Numax SP123 is another excellent value for money machine, which doesn’t even compromise on any feature as well.

With an exact design that sits perfectly for every job, it has all the safety features you would need as well. The body is made from aluminum, which has all the strength while being very lightweight and ergonomic.

Overall, it’s a great pick for those who don’t have a big budget but still want a machine to last for years to come.

More photo & price on


  • Lightweight
  • Ergonomic design
  • Safety features included
  • Very cheap


  • Not for heavy-duty
  • Not for professionals

5. Makita AF353 23 Gauge Pin Nailer

Makita AF353 is a very powerful and versatile tool that can easily manage all the heavy-duty work you have, and no matter how long you use it, it will always be worth your money and time.

Moreover, there is a fantastic lock-out mechanism for the pins that protect the surface and the tool from dry fires; usually, this issue isn’t addressed by a lot of machines.

So, if you have a mediocre range and want a high-quality machine for heavy-duty work, make sure to check this amazing nailer out.

More photo & price on


  • Nail lock-out for dry fires
  • The aluminum body is very durable.
  • Lightweight and ergonomic
  • Carries up to 130 nails


  • A bit pricey

6. Dewalt DWFP2350K 23 Gauge Pin Nailer

Want an oil-free nailer to rule out the possibility of staining out your workplace? Well, here it is. This one-of-a-kind pin nailer by DeWalt comes with an oil-free nature and many more features.

There is depth adjustment to make sure you can work with all the projects while the tool-free jam release is also something I don’t want to miss mentioning.

It is the first-ever pin nailer to offer this and makes it a piece of cake to remove the jams.

More photo & price on


  • Tool-free jam release
  • Oil-free operation
  • Easy depth adjustment
  • Reload alert


  • Some troubles with ¾” nails
  • Pricey

7. Grex P535 23 Gauge Pin Nailer

Even though this is not a very well-known nailer, I found it extremely well while doing the review, and nothing was stopping me from adding it to my top picks.

Probably the best thing about this is the patented design, which doesn’t require the need to adjust it for different fastener lengths.

There are significant safety features, such as the double trigger, and the nose is quite narrow, making it great to reach the right places.

More photo & price on


  • Great for confined places
  • Very powerful operation
  • Great design: no need to adjust fastener length
  • Many safety features


  • Not so affordable

8. Senco 8F0001N 23 Gauge Pin Nailer

This headless pinner by Senco is another rather expensive choice but delivers an amazing premium experience.

Being an imported machine, it is one of the best amongst all these products when it comes to long-lasting and durable.

Moreover, it is straightforward to use, so I mostly suggest it to the new users who don’t know a lot about tools.

It’s a very versatile tool, and no matter what level of user you are, if you have the budget, this will be a great pick for you!

More photo & price on


  • Great durability
  • Easy to hold and work with
  • Very powerful motor
  • Versatile


  • Expensive
  • For Industrial usage

9. Metabo HPT NP35A Pin Nailer

Being equipped with the outstanding feature of automatically adjusting the magazine to the size of the nailer, this pin nailer by Metabo HPT is certainly a great one.

Being very versatile in usage, it comes with pretty much all the features one needs. The target audience for this is wide, and whether you’re a DIYer or a professional, this will certainly amaze you.

Lastly, there is a reload indicator and a big capacity, so you have an easier time with the reload routine.

More photo & price on


  • Reload indicator
  • Powerful motor
  • Versatile in usage
  • Automatic magazine size adjustment


  • Some claims of frequent jamming issues
  • Slight maintenance required

10. Porter-Cable PIN138 Pin Nailer

Porter-Cable PIN138 is a very consistent tool that is very close to being the best when it comes to long-term usage.

There are many powerful features it carries with it that make it one of the best out there.

You can use this device to drive nails down the depths of oak, and it will easily manage it.

Moreover, the motor is maintenance-free, so you don’t need to worry about spending money on it.

More photo & price on


  • Maintenance-free motor
  • Powerful and heavy duty
  • Automatic adjustment for fastener lengths


  • Better lasting guns out there

11. Arrow Fastener PT23G 23 Gauge Pin Nailer

This is a seriously high value for money device, and even if you are thinking about renting a nailer for a short-term project, it might be better to spend some more bucks and buy this one instead.

The quick load magazine is a good feature and honestly makes things quite straightforward for the beginners. The grip is also very comfortable, and one can easily work for hours with it.

So, if you don’t have much money but need a good light usage nailer, I don’t think there’s a better one out there.

More photo & price on


  • Very easy to use
  • Quick load magazine
  • Comfortable grip
  • Very cheap


  • Not so durable
  • Only for small projects

12. Makita XTP02Z LXT 23 Gauge Pin Nailer

Looking for something which doesn’t need an air compressor to run?

Well, this one by Makita is probably the best cordless nailer out there and delivers you all the power you need only using its batteries.

Its cordless nature lets you work anywhere you want, and you get to enjoy all the great features like tool-less adjustments and an anti-dry fire mechanism as well.

More photo & price on


  • Very portable
  • Can drive nails of 6 different length
  • 120 nails per magazine
  • Anti-dry fire mechanism


  • Heavier than usual machines

Frequently Asked Questions

In this section, I will answer some of the most frequently asked questions by the beginners. So, make sure you take a look if you are a beginner as well.

What gauge is a pin nailer?

Pin nailers are used to drive the smallest of the nails available. However, they are usually 23 Gauge.

What’s the difference between a pin nailer and a brad nailer?

Brad nailers are heavier tools for major tasks such as trimming door casings and wainscoting, while the pin nailers are only used for small and delicate tasks.

Can you use a pin nailer for baseboards?

No, it is too underpowered. You can use a brad or a finish nailer, though.

What is a 23 gauge pin nailer used for?

They are typically used for trimming of materials, which are very small and delicate and would fall apart if heavy nailers e.g., a brad nailer, are used.

When to use headless pins?

They are used for the fastening of pieces that are small and delicate.

What safety measures should be taken when using a pin nailer?

You should always wear safety gloves, appropriate eyewear as well as earmuffs.

What is a good magazine capacity?

It depends on your work. However, it should be at least around 100 pins since anything less than that would require you to reload often.


Pin nailers are very important tools, and without them, it’s pretty hard to do the trimming or fastening work when small pieces of wood are involved.

If you also need to buy a suitable pin nailer for yourself, make sure you go through the entire article above as it will help you choose exactly what you need.

Also, drop any suggestions if you do have them!

Read Also:

Written By
More from Michael Cox
8 Best Airbrush Compressor Reviews 2022 | Easy To Use
Even though an airbrush is one of the essential items used in...
Read More
Leave a comment

Your email address will not be published.